01
02
03
04
Beams for under driveable slast for tractor load with 4 ton axle load, track width 180 cm, axle distance 180 cm and wheel print 30x40cm Support: see processing conditions. Hammer piece 50x20x20 available type 2020.050
Underride beam for under ride-on slats provided for a tractor load with 4 tons Axle load, wheel base 180 cm, axle spacing 180 cm and wheel print 30x40cm. Bearing: see processing conditions. ATTENTION: Beams with lengths up to and including 350cm are only laid on both ends. Beams longer than 350cm must always be supported at both ends and in the middle.
Beams for under driveable slats and T-Floors with: - driving axle load 12 ton - track width 200 cm - axle distance 120 cm - wheel print 40x40cm - tilt position axle load 15 ton - track width 200 cm - axle distance 200 cm - wheel print 40x40cm. Support: see processing conditions. Hammer piece 50x20x20 available type 2020.050
Undercut beam for under rideable slat- and dump floors with: - driving Axle load 12 tons - wheel base 200 cm - axle spacing 120 cm - wheel print 40x40cm - tipping position Axle load 15 tons - wheel base 200 cm - axle spacing 200 cm - wheel print 40x40cm. Imposition: see processing conditions. ATTENTION: Beams with lengths up to and including 350cm are only laid on both ends. Beams longer than 350cm must always be supported at both ends and in the middle.
Anders Beton applies general delivery and processing conditions.
Additional specific processing conditions are available for certain products.
See specific processing conditions Beams
